Holley 02121NOS Bedienungsanleitung

P/N 199R10382 2005 Mustang Wet Single Fogger Kit Kit Number 02121NOS OWNER’S MANUAL CONGRATULATIONS on purchasing your NOS Nitrous Oxide Injec

2. Install the Soft Plume Nozzle (22), taking into account the length of the nitrous and fuel supply hoses and the intended location of the solenoids

Figure 6 Mount the solenoid assembly to the driver’s side foremost valve cover bolt. See Figure 6. Ensure that the assembly and lines do not inter

2. Install the 4AN fitting (12) into the injector block with Teflon paste, while secured in a soft jaw vise. Tighten securely. See Figure 9. WAR

Figure 12 Electric Wiring Schematic 2.9 Electrical System Installation (WOT/Window Switch) Refer to Figure 12 and the procedures in this section

Components Figure 13 Snap in rocker switches & use backing plate with purge switch. Installed Figure 14

Coil #3 is closest to the firewall. Coil #1 is closest to the radiator. Figure 18 Figure 19 11. Connect the brown / yello

2.10 WOT/Window Switch Troubleshooting- Verifying the operation of the NOS WOT/Window Switch NOTE: NOS highly recommends that the user NOT change

Chapter 3 Routine Maintenance 3.1 Nitrous Solenoid Filter When nitrous bottles are refilled they can become contaminated with debris, if the refil

Figure 23 Exploded View of a Typical Solenoid Appendix A Troubleshooting Guide The troubleshooting chart on the following pages should help deter

Mismatched N2O/fuel jetting. Compare jetting to recommended values. Install correct jets. Excessive fuel pressure. Install fuel pressure gauge, such

NOS nitrous oxide is legal for use in most states when used in accordance with state and local traffic laws. NOS does not recommend or condone the us

Nitrous Oxide Accessories NOS systems are calibrated for optimum performance with a bottle pressure of 900-950 psi. The pressure will change with te

TABLE OF CONTENTS WHAT IS NITROUS OXIDE? ...4 Do’

WHAT IS NITROUS OXIDE? NITROUS OXIDE… …Is a cryogenic gas composed of nitrogen and oxygen molecules …Is 36% oxygen by weight …Is non-flammable by its

These kits have been designed for safety and smoothness of operation. Nitrous oxide is injected into the engine only when the following conditions ar

1.3 Kit Components Before beginning the installation of your NOS kit, compare the components in your kit with those shown in Figure 1 and listed in

Figure 1 Kit #02121NOS Wet Kit Components Chapter 2 Kit Installation 2.1 Bottle Mounting Instructions NOTE: Disconnect the battery ground be

Figure 2 Nitrous Bottle Siphon Tube Orientation Figure 3 Nitrous Bottle Mounting Orientations 2.2 Bottle Orientation

Figure 4 Exploded View of Kit #02121NOS Wet NOS System 1. Install the bottle nut adapter (1) and Teflon washer (2) on the nitrous bottle (3). Tig